To configure any of the User Levels as above; follow the following steps:
Step 1:
Login to SmartMIB application GUI as in Figure (1).
Figure (1)
| Note: |
|
After logging into the GUI; the ‘status bar’ figure below shows the User Name of the current user and the package description as per the Product Part Numbers.
|
Step 2:
From the GUI’s main menu; select (Administration -> Security -> Users) as is shown in Figure (2); to get the ‘Add New User’ Window shown in Figure (3).
Figure (2):
Add the User Name and other User related credentials and assign – when necessary or applicable as per the package type used – those ‘managed zones’ to be administered by the particular configured user.
Figure (3):
Step 3:
From the GUI’s main menu; select (Administration -> Security -> User Levels) as is shown in Figure (2) above; to get the ‘User Levels List’ Window shown in Figure (4).
Figure (4):
Clicking on the ‘Add’ button (or the ‘Modify’ button); will open up the Add (or Modify) ‘User Level Information’ window shown on Figure (6) below. This window will allow the administrator to create a new user Level type and define the set of action(s) that the particular User Level controls.
Figure (6):
From the ‘Users List’ below on Figure (7) the defined User Level is listed for each of the defined Users. This user level could be of course modified or altered continuously as desired by the main administrator(s) from this window.
Figure (7):
[White
Papers], [Open a Support Ticket],
[Report Defects],
[Enhancement Requests], [Beta
Solution Program]
